Discover all our products
for CO2 Refrigeration
Convenience Stores CO2 Refrigeration
CO2 Refrigerating Systems for Convenience Stores
We design and manufacture some of the most complete ranges of “commercial” refrigeration equipment.
Here our Applications for CONVENIENCE STORES
Products
CUBO2 SMART
Cooling Capacity:
MT from 0,6 kW up to 8,5 kW - BT from 0,65 kW up to 7,9 kW
CUBO2 Smart is an high efficiency condensing unit (for CO2 transcritical application) equipped with BLDC variable speed compressor.
It is compact, easy to install and can directly communicate with the refrigerated units.
Thanks to these features it is a very efficient (even at partial load) without any compromise with the food conservation.
CUBO2 PLUS
Cooling Capacity:
MT from 4,6 kW up to 34 kW - BT from 1,1 kW up to 12,5 kW
Design is compact and units are easy to install and maintain.
Units are equipped with gas cooler and electrical panel, tested and factory programmed for an easy start-up.
CUBO2 AQUA
Cooling Capacity:
MT from 0,6 kW up to 8,5 kW - BT from 0,65 kW up to 6,6 kW
CUBO2 AQUA is an high efficiency condensing unit (for CO2 transcritical application) equipped with BLDC variable speed compressor.
It is compact, easy to install and can directly communicate with the refrigerated units.
Thanks to these features it is a very efficient (even at partial load) without any compromise with the food conservation.
SMART BOOSTER
Cooling Capacity:
MT Cooling Capacity @ -8°C (50 Hz) | Tout. GC = 35° | LT Cooling Capacity @ -30°C (50 Hz)
Design is compact and units are easy to install and maintain.
Units are equipped with electrical panel, tested and factory programmed for an easy start-up.
LEAN BOOSTER 2.0
Cooling Capacity:
Up to 150kW MT and 50kW LT
The lean line is a range of CO2 units in configuration as MT only or in booster MT/LT featuring the following:
EXTENDED CONFIGURATION UP TO 4 COMPRESSOR MT/IT AND UP TO 3 LT
- Easy access to components from one side (possibility to install the unit against a wall);
- Available in indoor or «plug’n cool» version with integrated gas cooler
PNC & PNCC
Cooling Capacity:
-
PNC (Plug’n’Cool) version, is an outdoor compressor pack including housing and integrated condenser with axial fans.
Closed frame, made of thick galvanized sheet, additionally protected with a coat of oven-baked polyester-based thermosetting paint.
Stainless steel screws and bolts. RAL 9006.
WALK IN
Closed frame made of thick galvanized sheet, additionally protected with a coat of oven-baked polyester-based thermosetting paint.
Stainless steel screws and bolts. RAL 9006.
Request Information or Quote
Fill in the form for any question, information or quote.
Our Strenghts
Flexible in the production
Fast delivery times due to very good sub suppliers chain.
Huge knowledge
Huge knowledge of different compressors brand and Controller type in Transcritical plants.
Constant commitment in finding new solutions
Constant commitment in finding new solutions to improve efficiency and simplify our systems, using our Beijer Ref Academy
SUSTAINABLE CO2 REFRIGERATION
There are several national and international programs that regulate refrigerants, one of those being the European F-gas regulation.
The F-gas rule significantly reduces the amount of fluorocarbons that are sold in the European Union by dramatically phasing them down.
CASE STUDIES
SCM Frigo has been selected as one of the strategic partners for Danfoss’ Smart Store
SCM Frigo has been selected as one of the strategic partners for Danfoss’ Smart Store which operates not only as a functioning supermarket, but is also a development center for testing new…
A Transcritical Rack only MT running in Hypermarket near Lyon
A Transcritical Rack only MT running in E.Leclerc Hypermarket near Lyon. The highlight of our work is when one of our transcritical CO2 units is started up in the setting…
A subcritical CO2/glycol low temperature cascade running in France
This week we assisted Le Froid Provençal in the commissioning of a subcritical CO2 cascade that ensures the refrigeration production of a -22°C warehouse
2 Transcritical Chillers as a highly efficient solution for a Pharmaceutical Process
2 Transcritical Chillers as a highly efficient and sustainable solution for a Pharmaceutical Process in Lithuania
WASTE TO BIOFUEL is possible thanks to our Low Temperature only Booster unit.
WASTE TO BIOFUEL is possible thanks to our Low Temperature only Booster unit. Full CO2 refrigeration installation providing 80 kW @-45°C for Biomethane production.
WHAT WE DO
Natural gas refrigeration systems are our mission and the main assets of our human resources are enthusiasm, team spirit, initiative, willingness to work hard and result orientation
Commercial Refrigeration
We design and manufacture some of the most complete ranges of "commercial" refrigeration equipment.
Applications range from the smaller systems for convenience stores to large hypermarket systems
Industrial Refrigeration
We design and manufacture some of the most complete ranges of "industrial" refrigeration equipment and industrial chillers.
Our applications are designed for cold rooms for storage and distribution of food products, and for skating rinks and processing plants.
LET'S START
Building Connections
Building Connections
FOLLOW US
On LinkedIn
On LinkedIn